HOHM TECH GROWN 26650 BATTERY 4244MAH 47.8A

$16.75

  • Product Code: M00001263
  • Availability: In Stock
  • Ex Tax: $16.75

Extraordinary choice for those that want serious punch in the 26650 world, without forfeiting capacity. These are officially rated at 4244mAh, with a CDR of 30.3A, and 80oC | 2.8V cut-off limit (whichever occurs first) @ 41.1A. Cells are labeled with the Ohm’s Law calculation with real-world device efficiency factor so no guessing on wattage capabilities. All ratings are subject to meet and/or exceed strict limitation policies set forth for DLr1, TID2, PVDL3, CLR4, mR5, and Temperature (°C). Hohm GROWN2 is based off the QSP format, with chemistry unity process now at a slower mHz (megahertz) to keep costs down while achieving unprecedented capabilities.

Every Hohm Tech cell model has been tested and certified by UN38.3, EN62133, IEC62133 2nd Edition, and UL1642 accredited laboratories and testing facilities assigned by regulatory bodies.  This includes MSDS, CE, ROHS, UN38.3, IEC, Specifications, and Air/Sea Transport certifications.  We do not cut corners. We deliver what we promise… chart topping performance, capacity, consistency, and safety.


Capacity: 2547mAh
Max Charge Rate: 3.82A
Max Charge Voltage: 4.2V
Continuous Discharge Rate: 25.3A
Max 80oC | 3.2V cut-off: 35.8A
Pulse | Peak6: 42.4A
Cycle Life Retention: 500 Cycles (69%), 1000 (58%)
Chemistry Type: QSP Li-NMC


To expound on safety:

• modified cathode tag consisting of higher purity aluminum (UHP Al) is utilized to aid in lowering internal resistance
• updated poly seal with refined bitumen is installed in every cell to ensure excess pressure is controlled

* NOTICE: Hohm Tech does not manufacture batteries. These are made for and licensed to Hohm Tech Int’l achieving their requirements set forth.
** CAN BE CHARGED AT 5.30A. This is not a misprint. 5.3A as in FIVE POINT THREE amp charging is possible, tested, proven, and approved within all strict safety protocols set by Indonesia Chemistry.
*** TESTING BEYOND TEMPERATURE. Hohm Tech cells utilize both static & dynamic testing that includes but not limited to: density loss, thermal distribution, volt drop limiters, cycle life retention, and temperature. These tests are imperative to achieve true cell performance, longevity, and overall quality.

Density Loss Ratio

Thermal Image Distribution

Pulse Voltage Drop Limitation

Cycle Life Retention

Resistance Retentivity Pre|Post

Pulse & Peak is applicable to Dynamic EV Systems ONLY and rated @ 5 SEC ON / 30 SEC OFF


WARNING: LI-ION CELLS HAVE INHERENT RISKS IF MISUSED OR MISHANDLED.   CELL CAN EXPLODE CAUSING SEVERE BURN INJURY, FATALITY, AND PROPERTY DAMAGE.


CELL = BATTERY

  • KEEP OUT OF REACH of anyone under 18 years of age, AND pets.
  • DO NOT PUT IN FIRE, oven, microwave, or expose to anything over 100oC (212oF)
  • DO NOT  CARRY or store OUTSIDE of its protective packaging or a PROTECTIVE CELL CASE.
  • DO NOT PUT IN POCKET, bag, purse, or anywhere WITH METAL OBJECTS including COINS and KEYS.  Cell needs to be in protective packaging or case at all times when not in use.  Otherwise, cell(s) could short-circuit and explode.
  • DO NOT PUT A DEVICE WITH CELL(S) INSTALLED IN POCKET or ON YOUR BODY. As unlikely as it may be, a device can malfunction, have a defect, internal damage, and/or be affected by conductive debris or object(s) in pocket that can overload or short-circuit cell causing it to explode.
  • DO NOT USE IN A DEVICE THAT CAN EXCEED MAX CELL WATTAGE (W) or AMPERAGE (A) (listed on each cell and retail packaging).  Otherwise, this can overload a cell, causing it to explode.
  • DO NOT USE A LOWER RESISTANCE (?) # (listed on each cell and retail packaging).  Otherwise, this can overload cell, causing it to explode.
  • DO NOT USE CELL WITH ANY DAMAGE TO ITS STRUCTURE OR OUTER PROTECTIVE LABEL (also called “WRAP”, “sleeve”, “skin”). Damage may include: dent(s), tear(s), nick(s), puncture(s), corrosion, or any other undisclosed abnormalities or damages.  Otherwise, a cell can short-circuit and explode. ALWAYS INSPECT cell VISUALLY and by TOUCH to SEE/FEEL for damage BEFORE EACH USE. ** SEE ILLUSTRATION BELOW AS GUIDELINE. **
  • DO NOT LEAVE UNATTENDED WHILE CHARGING, & REMOVE CELL(s) FROM CHARGER ONCE FULLY CHARGED to ensure it is not exposed to any potential charger malfunction such as overcharging which could damage cell causing it to explode.
  • DO NOT CHARGE HIGHER THAN MAX CHARGE VOLTAGE (V) (typically 4.2V) or DISCHARGE BELOW MAX VOLTAGE CUT-OFF (V) (typically 2.5V).  Overcharging or over-discharging cell(s) can cause irreversible damage and cause it to explode.
  • DO NOT MIX WITH USED or DIFFERENT BATTERY TYPES. Differences in cell capacity can lead to one or more cell(s) being overcharged or over-discharged. 
  • IF USING A MULTI-CELL DEVICE, the device MUST HAVE A NON-CONDUCTIVE BARRIER (typically plastic) OR FITMENT that PREVENTS CELL(S) from TOUCHING THE SIDE(S) OF ONE ANOTHER OR ANY ADJACENT METAL except for the very center of top and bottom of the cell. Otherwise, cell(s) could short-circuit and explode.
  • ALWAYS replace cell when capacity is decreased, up to a maximum of 12 months (1 year) when used in a removable-battery device (any device that cell can be removed).  Otherwise, cell degradation and wear incurred from repeated removal/installation can impede safety and subject cell to being short-circuited causing it to explode.
  • ALWAYS use, connect, charge, and operate cell(s) within their capabilities as listed on each cell, packaging, and product detail pages, while adhering to the device’s user manual.
  • COMPLETELY READ and follow the WARNING section listed on each cell, packaging, and here, in its entirety.
  • SEARCH www.YouTube.com for “18650 EXPLOSIONS” to understand the importance of consistently taking safety precautions and using Li-ion cells properly.  Hohm Tech advocates recycling and replacing any damaged Li-ion cell/battery. Or visit Hohm Tech Warranty Center for recycling and replacement.  Your safety is #1.



THIS PRODUCT CONTAINS NICOTINE, WHICH IS A HIGHLY ADDICTIVE SUBSTANCE.

Nicotine strength explained:

Different nicotine strength displays: 

You may see eLiquid strengths written as mg, mg/mL, or in percentage form. Here is how they are displayed in each:

     0mg = 0mg/mL = 0% Nicotine
     1.5mg =1.5mg/ml = 0.15% Nicotine
     3mg = 3mg/mL = 0.3% Nicotine
     6mg = 6mg/mL = 0.6% Nicotine
     12mg = 12mg/mL = 1.2% Nicotine
     18mg = 18mg/mL = 1.8% Nicotine
     20mg = 20mg/mL = 2.0% Nicotine

     

Contains: Vegetable Glycerol, Propylene Glycol, Nicotine, Other Flavourings. Can contain traces of allergens.

Diacetyl, Acetoin and Acetyl Propionyl free. 

Diethylene glycol free.

Not for use by people under 18 years old, Non-smokers, Pregnant, Nursing, People with cardiovascular conditions, Diabetes, Asthma or people sensitive to content.

Adverse effects: Headache, Dizziness, Dryness in mouth, Nose, Throat.

 

Warning: Harmful if swallowed

Keep out of reach of children. Wash hands thoroughly after handling. IF SWALLOWED: immediately call a POISON CENTRE or doctor/physician. Rinse mouth. Dispose of container in accordance with local regulations. 

Dispose of contents/container to by handing over to the person authorised to dispose of waste.

Can contain traces of allergens.


Write a review

Note: HTML is not translated!
    Bad           Good